Design Online is a unique and innovative design tool.
It’s the only programme that allows you to create bespoke designs for punching shear reinforcement in real time, online.
As you move through the step-by-step programme inputting project data, your PSR design develops dynamically on screen allowing you to review progress as you go and make any changes required.
At the end of the process, your design is saved to the ‘My Designs’ area from where you can download the drawings and full calculations, request a quote or make amendments to previously created designs.
While we have created Design Online to be simple and intuitive to use, please click here to view the User Guide. If you wish to consult the comprehensive LinkStudPSR Design Manual to EC2 please click here.
Please note:
All drawings and calculations produced by Design Online are created in line with Eurocode 2 (EC2) and assume that the column is acting on the slab from below. In cases where the column is acting on the slab from above and for any advice or assistance with Design Online, please contact our Technical Team on 08456 528 528 or via technical@linkstudpsr.com
View LinkStudPSR Design Online Terms and Conditions
The LinkStudPSR Design Online Programme is provided free of charge and on the understanding that it will used by or under the supervision of a qualified person undertaking full responsibility for the structural design of the project.
Users must be satisfied that any results or output generated by the programme are correct and ensure that the full LinkStudPSR Design Online design reference is always displayed on the calculations and drawings such that they can be referenced and checked in the future.
The design methods utilised by this design program are strictly in accordance with BS EN 1992-1-1:2004 (EC 2) and are appropriate to the LinkStudPSR Punching Shear Reinforcement System. The LinkStudPSR Punching Shear Reinforcement System carries CARES Technical Approval 5032 when used in accordance with CARES Technical Approval Report TA7-5032.
The designs produced using this software relate only to the LinkStudPSR Punching Shear Reinforcement System and should not be used with any other product.
Whilst every care has been taken in the development of this software by LinkStudPSR Limited, it is provided without any warranty of any kind either expressed or implied including but not limited to fitness for a particular purpose.
LinkStudPSR Limited is not responsible for damage that may occur due to its use or from any defects found. The user remains responsible for controlling and checking the input values and the calculations produced based on the current standards and approvals.
The Copyright and Intellectual Property Rights of the LinkStudPSR Design Online software and rights associated with the Design Online database are the property of LinkStudPSR Limited.
For your convenience, this page will not automatically appear on your subsequent visits to Design Online but can be accessed at any time by clicking on the ‘Design Online Welcome Page’ link.
Go to Step 1
